Synchronisation Evolution - N70 par bluetooth

Ceci est une ancienne révision du document !

Prérequis:

apt://multisync-tools opensync-plugin-evolution opensync-plugin-syncml libsyncml-utils

msynctool --listplugins

Doit vous rendre au moins:

Available options:
  syncml-http-server
  syncml-obex-client
  evo2-sync

Création du groupe et des utilisateurs

Création du groupe

msynctool --addgroup "Nom_du_groupe"

Création des utilisateurs

msynctool --addmember "Nom_du_groupe" evo2-sync
msynctool --addmember "Nom_du_groupe" syncml-obex-client

Configuration des utilisateurs

export EDITOR=gedit && msynctool --configure nokia-evo 2

Et là, c'est du xml bien laid mais on va faire avec:

<?xml version="1.0"?>

<!– (Only for bluetooth) The bluetooth address if the bluetooth mode is selected –> <bluetooth_address>00:19:2D:19:EA:47</bluetooth_address>

<!– (Only for bluetooth) The bluetooth channel to use. `sdptool browse $MAC` to search for the correct channel –> <bluetooth_channel>11</bluetooth_channel>

<!– (Only for USB) The usb interface number of the SYNCML-SYNC target. use syncml-obex-client -u (you will need access to the USB raw device) to find it. –> <interface>0</interface>

<!– The string that the plugin will use to identify itself. Some devices need a special string here. –> <identifier>PC Suite</identifier>

<!– The syncml version to use: 0 for 1.0, 1 for 1.1 and 2 for 1.2 –> <version>1</version>

<!– if the plugin should use wbxml –> <wbxml>1</wbxml>

<!– The username to use. Leave empty to not require a username –> <username></username>

<!– the password for the username –> <password></password>

<!– sets the connection type to use. 5 means obex over usb, 2 means obex over bluetooth –> <type>2</type>

<!– If wbxml is enabled, defines wether the wbxml should use string tables –> <usestringtable>1</usestringtable>

<!– Never send ADD command, but send REPLACE (not needed normally) –> <onlyreplace>0</onlyreplace>

<!– Workaround around for mobile phones which only use local timestamps and _no_ UTC timestamps! –> <onlyLocaltime>0</onlyLocaltime>

<!– Sets the maximum allowed size in bytes of incoming messages (some device need this option set). Example: 10000 –> <recvLimit>10000</recvLimit>

<!– The name of the contacts db. Must be the same as the phones sends –> <contact_db>Contacts</contact_db>

<!– The name of the calendar db. Must be the same as the phones sends –> <calendar_db>Calendar</calendar_db>

<!– The name of the note db. Must be the same as the phones sends –>

Notes</note_db>